|
|
|
|
Peruzzo TB100, Self Feeding, 3-Point Mounted, PTO Powered Wood Chipper with "Drum Style Rotor"!
Expect This Chipper & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
GENERAL FEATURES:
-
Drum Type Chippers Offer Superior Performance & Results & Less Maintenance Than Rotor/Disc Style Chippers.
-
Watch the Video & Observe the Swift Self-Feeding System, the Stable Holding of Branches as they Pass Thru the Hopper, The Stable Condition of the Chipper Itself & Smaller, Uniform Size of the Chips.
-
Unlike the Rotor/Disc Style Chippers, This Peruzzo Drum Chipper Does Not Allow Violent Movement of Limbs & Branches During The Intake/Feeding Process, which creates a Potential for Head Knockers, Eye Pokers, etc - A Tremendous Safety Issue!
-
Also Unlike the Rotor/Disc Style Chippers, the Chipper is Not Vibrating, or Bouncing Around, Which Leads to Premature Wear & Tear on the Chipper & also Introduces Another Safety Hazard.
-
With the 4" Tall x 12" Ultra-Wide Hopper Opening Enabling the Worst, Most Serpentine & Clumsy Pieces to be Fed, Chainsaw Work is Reduced, and Clogging is Minimized.
-
This Large Throat Opening Accommodates Chipping Dimensional Lumber, Cane Type Plants & Shrubs, Palm Fronds, Cactus Leaves & Other Vegetation!
-
A 12" Wide Hopper is the Widest Throat Opening Available for 4" Chippers. In Fact, Typically, you'd have to get a 7" Chipper to get a 12" Wide Throat Opening.
-
Chipper has 2 Double Sided, Hardened Tool Steel, Presharpened Drum Blades.
-
Powder Coated Paint!
-
Chipper is Shown Mounted on a Tractor for reference only - Tractor is not included.
-
Chipper Ships Assembled & Includes a Shear Bolt Protected 540RPM PTO Shaft.
-
Suitable For Category 1, 3-Point Hitches.
-
Recommended Tractor HP Range is 18 to 50HP.
-
4" Tall x 12" Wide Throat Opening.
-
The Chipper Drum with 2 Embedded Blades Provides The Best Self-Feeding Chipper On The Market!
-
Drum is 6" X 12" Wide.
-
Hopper is 18" Tall x 20" Wide x 42" Deep (to Blades).
-
With Chipper on the Ground, it's 27" to Bottom of Hopper Feed Shelf.
-
As Shown in Photo, it's 51" from Grade to the Tip of Deflector.
-
Total Weight: 413lb's (Less PTO Shaft, Pallet/Crating, etc.).
-
Specifications are based on manufacturer provided data & subject to change.
|
|
|
|
|
|
|