|
|
|
|
Peruzzo, Koala Series 1600, 60" Flail Mower with Ground Discharge Collector Hopper.
Expect This Peruzzo Collection Mower & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
GENERAL FEATURES:
-
Peruzzo's Collection Flail Mowers Provide the Superior Cut & Performance Expected with Peruzzo Flail Mowers, as well as the Option of Collecting the Clippings!
-
The Collection Hopper Opens Hydraulically for 'Hands & Labor Free' Dumping of Collected Material, for Reuse as Organic Weed Control, Compost Mulch, Livestock Feed, or Disposal.
-
This Peruzzo Collection Flail Mower Has 50 'Forged & Hardened Steel' Hammer Blades - Peruzzo Flail Mowers Always Have the Highest Population of Blades to Provide the Best Possible Cut & Reduce the Burden on Your Tractor!
-
The Koala Series is Convertible to a VertiCutting Collection Mower by Adding the 'Optional' Hardox VertiCutting Blades:
-
Hardox VertiCutting Blades Are Compatible w/Formed Steel Hammer Blades But NOT Compatible With Standard Solid Forged & Hardened Blades.
-
Air Blades Are Available For Additional Propulsion Of Heavier Material During VertiCutting Activities!
-
Reference Photos with Blades!
-
Suitable For Fraise Mowing To 0.75" Below Grade.
-
Cutting Height Can Be Set Up To 5" Above Grade.
-
Requires One Hydraulic Circuit for Open & Close Dump Gate.
-
Powder Coated Paint!
-
Tractor Shown For Reference Only - Not Included.
-
Mower Includes Gage Wheels (as shown) & 540RPM PTO Shaft!
-
Rated for 30 to 50HP Tractors.
-
Tractor counter-weight ballasting may be required on smaller, lighter Tractors!
-
Suitable for Cat 1, 3-Point Hitches.
-
Hopper Capacity: 32 Cubic Feet.
-
Working Width: 60".
-
Overall Width: 69".
-
Overall Length: 57".
-
Overall Height: 43".
-
Fraise/Fraze Mowing Depth: 0.75" Below Grade.
-
Cutting Capacity: 2" Dia.
-
Cutting Height: 5".
-
Electronically Balanced Rotor Has 50 Forged & Hardened Steel Hammer Blades.
-
Heavy Duty Rotor & Forged & Hardened Hammer Blades Rated to Cut 2" Diameter Material.
-
Weight: 840lb's (Less PTO Shaft, Pallet/Crating, etc.).
-
Specifications are based on manufacturer provided data & subject to change.
|
|
|
|
|
|
|