|
|
|
|
Heavy Duty Commerical Series: Peruzzo Bull Cross 1800E Multi-Purpose Ditch Bank Flail Mower; 70" Cut, Hydraulic Offset & Tilt, External Gearbox for Maximum Reach!
Expect This Peruzzo Mower & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
ABSOLUTELY ALL THE BEST FEATURES!:
-
This Peruzzo Flail Mower Has a 16" Dia. Severe Service Duty Rotor With 16 Large Forged & Hardened Steel Hammer Blades - Peruzzo Flail Mowers Always Have the Highest Population of Blades to Provide the Best Possible Cut & Reduce the Burden on Your Tractor!
-
These Substantial Blades Can Be Sharpened Multiple Times & Typically Have a Very Long Life!
-
Use The Convenience of The Upward 90° Rotation & Remain Standing to Inspect, Sharpen & Service The Blades!
-
Peruzzo 'Bull Cross Series Ditch Bank Flail Mowers' Are Equipped With Severe Duty 'Series 8' PTO Shafts. The Series 8 PTO Shafts Are Suitable For Higher HP Ratings & 'Severe Service Duty' Usage!
-
Peruzzo Mower Gearboxes Include an Over-Running Clutch, Which Provides Two Advantages:
-
Peruzzo Gearboxes Also Include an Easily Visible 'Oil Level Sight Glass' for Clean, Convenient & Tool Free Gearbox Oil Level Checking!
-
Offset & Head Positioning Functions Operate Hydraulically.
-
'Raise & Lower Cylinder' Has Three Unique Features for Performance Efficiency, for Mechanical Protection of the Mower, and for Operator Safety:
-
Set This Valve to a Slower Setting Until You've Mastered Feathering the Controls to Rotate the Deck 90° Upward, or 60° Downward! Once You've Got it, You Can Adjust the Flow Control Valve for Faster Operation!
-
Dual Breakaway (Hyd & Mech) Limited & Self-Resetting:
-
Lower Right Rear of 3-Pt Frame Has a Removable Pin for 'Lock-In-Place' Operation (when mowing level, predictable terrain), or Remove the Pin for Limited & Self-Resetting Breakaway Protection - Also for Front to Rear Deck Oscillation (for following uneven terrain).
-
A Large Deck Enclosure Accommodates Higher Volumes of Material for Superior Finish Results, Superior Mulching Results, Less Burden Transferred to the Tractor & Better Ground Speeds. It's Also Large Enough for the Rear Roller to be Within the Footprint of the Deck (instead of protruding out beyond the back).
-
Under Deck 'Mulching Counter Blade' Ensures Reduction of Larger Clippings & Further Reduces the Smaller Ones.
-
Full Double Deck Shell Protects the External Shell From Rocks & Other Internal Projectiles:
-
Large 8" Dia. Rear Roller Provides Mower Deck Suspension & Cutting Height Adjustment (1/2"-5"):
-
Dual Top Link Pin Holes:
-
Multiple Advantages of This Offsetable Mower Over Static, Center Mounted 3-Point Mowers:
-
If You're Mowing Along a Fence Line, Tree Line, Building, etc., Instead of Getting Your Entire Tractor Along Side of the Fence or Building (and risk scraping your tractor tires or snagging & damaging trees, posts, fencing, buildings, etc.), You Can Simply Keep the Offset Part of the Mower Close to the Edges You Want to Mow and Prevent Any Damage to the Tractor, the Trees, Fencing, Walls, etc. Snagging Posts, Trees or Other Secured Objects Can Also Damage the 3-Point Linkage on the Mower or Even the Pull Arms & Top Link of Your Expensive Tractor.
-
Much, Much Better Visibility: If the Edge of Any Mower is Flush With the Sidewall of Your Tractors Tire, Forget About Visibility! You'll be Cutting With Your Tractor Tire as a 'Guide', Which is ok in Open Areas, But Again, When You're Mowing up Against Obstacles, You Want Visibility, and the Offset Feature Will Provide That. It Will Also Eliminate the Need to Look Back Over Your Shoulder to See the Mower Deck. A Simple Glance to Your Right Gives You Visibility of the Outer Mowing Edge.
-
The Multi-Purpose Characteristic of Peruzzo Flail Mowers Provides A Superior Rough Cut Than Any 'Rotary Rough Cut Mower' & A Superior Finish Cut Than Any 'Rotary Finish Mower'! Plus With the 'Forged & Hardened' Hammer Blades on This Flail Mower, You Can Cut 4" Diameter Material & Still Get A Superior Finish Cut Too!
-
Peruzzo Flail Mowers Are The Safest & Most Efficient Mowers Available:
-
With Peruzzo Flail Mowers, the Possibility of Discharging Dangerous Projectiles is Dramatically Reduced Compared to Conventional Rotary Mowers, and with the Reduced Deck Depth & Weight, They're the Easiest for You & Your Tractor to Handle! Plus, the Superior 'Single-Pass' Cut of Peruzzo Flail Mowers Provides New Efficiencies by Eliminating Multiple Passes For Excellent Results!
-
With the External Gearbox & Unique Hitch Configuration of Peruzzo's Bull Cross Series Mowers, Expect to Get the Most Right Side Reach Possible!
-
4) Anti-Static (& Oil Resistant) Belts Prevent Bearing Damage From Static Electricity.
-
Plus:
-
Sample Photos & Video are of the Model 2200E Bull Cross, But This Listing is for the Bull Cross 1800E (As Stated Above), and Only for the Bull Cross Mower - That Nice Green, 6130 Tractor is Not Included!
-
Mower Ships Assembled & Ready To Use:
-
This Means No Assembly Headaches from Poor Instructions, No Missing Parts & Associated Delays, No Special Tools, No Knuckle Busters & No Waiting Until It's Assembled Before First Use!
-
Mower Ships with 540RPM PTO Shaft!
-
All of These Excellent Features Work Together to Outperform Your Expectations in Rough Cutting, Mulching & Finish Cutting Applications, With Beautiful, Single Pass Results, With Efficient Ground Speeds & With Ease of Demand on Your Costly Tractor & it's Fuel Tank! Most of All, it Makes Mowing Fun Again!
-
Rated For 60 To 110HP Tractors.
-
Suitable for Cat 2, 3-Point Hitches.
-
Mowing Width: 70".
-
Overall Deck Width: 88".
-
Overall Depth: 44".
-
Distance From Center-line of 3-Point to Outer Edge of Deck is 9'-8".
-
Electronically Balanced Rotor Has 16 Hammer Style Blades.
-
Large, Heavy Duty Blades Weigh 3.5lb's each.
-
Rotor & Blades Rated To Cut 4"-5" Diameter Material.
-
Rotor Speed is 2250RPM's.
-
Blade Tip to Blade Tip Speed is 105MPH.
-
Blade Tip to Blade Tip Diameter is 16".
-
Requires Two Sets Of Hydraulic Outlets.
-
Weight: 1,692lb's (Less PTO Shaft, Pallet/Crating, etc.).
-
Specifications are based on manufacturer provided data & subject to change.
|
|
|
|
|
|
|